Still Problem with the current 2 / "Alexander Meis" <am@simoon.de>

Hi....

ok, i checked again pound-current with the current version of lighttpd still
the same problems with that "no server" error. Even if there is no keepalive
in the lighttpd.
i switched back to the 1,7 but the ram consumption is very high.
http://cook1.chefkoch.de:81/maps.txt
so that sometimes
Sep 16 20:51:49 balancer1 pound: HTTP pthread_create: Cannot allocate memory
appears.

How can i check what the problem is?

Thanks

Alex

RE: Still Problem with the current
"John Hansen" <john(at)oztralis.com.au>

2004-09-16 23:14:59

[ SNIP ]

> I'm using pound on a very similar system (RH-7.3, updated to latest
> errata) and haven't had any problems for quite some time now 
> (however the box has only light load, ~20-30 hits/sec). I get 
> some errors in the logs as well but never got the signal 11 
> error. Doesn't sound very nice. Is this a SMP box?
> 

I run SMP as well, and I too get these errors, partial content, e500's...

... John

RE: Still Problem with the current
"Simon Matter" <simon.matter(at)ch.sauter-bc.com>

2004-09-17 07:30:10

[ SNIP ]

>> I'm using pound on a very similar system (RH-7.3, updated to latest
>> errata) and haven't had any problems for quite some time now
>> (however the box has only light load, ~20-30 hits/sec). I get
>> some errors in the logs as well but never got the signal 11
>> error. Doesn't sound very nice. Is this a SMP box?
>>
>
> I run SMP as well, and I too get these errors, partial content, e500's...

I don't know if it means anything but it could. I suggest booting a
standard UP kernel (no bigmem and SMP support) and limit the memory to
512M just to see what happens.

Simon